Hub · specifications

LED display specifications: the complete guide

Every parameter that defines an LED display, explained with typical value ranges — plus a filterable comparison of 50 real models from 14 manufacturers. Every figure comes from an official spec sheet; blanks mean the vendor does not publish it.

Last verified: Last updated: 2026-10-12 · Spec values verified 2026-09-26 against official vendor sources. · Specs transcribed from official vendor pages and spec sheets.

What “LED display specifications” means

LED display specifications describe a panel in five categories: image and optical (pixel pitch, brightness, contrast, refresh rate, grayscale, viewing angle), mechanical and environmental (cabinet size and weight, IP rating, operating temperature), power (maximum and average consumption), electronic control (scan mode, driving IC, control-system compatibility), and certifications (CE, FCC, ETL). Together they decide how sharp the image looks, where the panel can be installed, how much power it draws, and what it costs to run. This page explains every parameter with typical value ranges and compares 50 real models from 14 manufacturers side by side — every figure taken from official spec sheets, with gaps left blank rather than estimated.

The five specification categories

Use this as the index: each category below links to the parameters it contains.

CategoryDecidesKey parametersUnitsTypical range
Image & opticalHow the picture looksPixel pitch, brightness, contrast ratio, refresh rate, grayscale, viewing angle, color gamutmm · nits (cd/m²) · :1 · Hz · bit · degreesPitch 0.9–10 mm; brightness 600–1,500 indoor / 5,000–10,000+ outdoor; refresh 1,920–7,680 Hz; grayscale 14–16 bit; viewing 140–160°
Mechanical & environmentalWhere it can be installedCabinet size & weight, IP rating, operating temperature, maintenance accessmm · kg · IP code · °CCabinets 500×500 / 500×1000 mm; IP20–IP40 indoor, IP65+ outdoor; −20–60 °C outdoor
PowerRunning cost & electrical supplyMax / average power consumptionW/m²300–1,000 W/m² max on typical cabinets
Electronic controlHow the panel is drivenScan mode, driving IC, control-system compatibility, signal/power redundancy1/4–1/32 scanVaries by vendor; often unpublished
CertificationsWhere it may legally be installedCE, FCC, ETL, RoHS—Required for most commercial projects

Parameter index

Every parameter, one click away. Pixel pitch has its own in-depth hub — the rest are defined in the glossary below.

Model specification library: 50 models, 14 brands

The table no guide page dares to print: real models with real figures, side by side. Filter by brand or pitch class. “—” means the vendor does not publish that figure — we leave it blank rather than estimate. Indoor/outdoor is inferred from the IP rating and stated application.

ModelPitch (mm)Brightness (nits)Refresh (Hz)Cabinet (mm)IPPower max (W/m²)UseApplication
CVES0.9
AOTO · CV MINI Series
0.93755504000600 × 337.5IP30642Indoorcontrol rooms, studios, meeting spaces, retail, transportation
CVES1.5
AOTO · CV MINI Series
1.56256003840600 × 337.5IP30543Indoorcontrol rooms, studios, meeting spaces, retail, transportation
E4LF
AOTO · EXLF Series
4550038401152 × 1728IP65603Outdoorurban street DOOH advertising, pole-mounted billboards
E5LF
AOTO · EXLF Series
5.14550038401152 × 1728IP65603Outdoorurban street DOOH advertising, pole-mounted billboards
XT1.2
Barco · XT series
1.28003840609.92 × 343.08IP30704Indoorcontrol rooms, meeting rooms, boardrooms, TV studios, flagship venues, design centers, corporate
XT1.2-E
Barco · XT-E series
1.26003840609.92 × 343.08IP30655Indoorcorporate, control rooms, TV studios, entry-level Barco quality indoor LED
XT1.9-HB
Barco · XT-HB series
1.913003840609.92 × 343.08IP30598Indoorlobbies, experience centers, bright indoor spaces, longer viewing distances
Matrix 2.6
Desay · Matrix
2.60410007680500 × 500IP30/30550Indoormodular indoor fine pitch, mixed cabinet sizes, posters
WT3.9
Desay · WT
3.90660007680250 × 1000IP65/65650Outdooroutdoor fixed installation, wall-mounted, totem, corner
IL-FISS-IROrionLED 108" SSG
INFiLED · OrionLED
1.2560038402400 × 1350IP54 front / IP30 rear401Indoormeeting rooms, classrooms, retail, showrooms, museums, digital signage
IL-RSS-IRDB1.95mk2 M2 CBSF
INFiLED · STUDIO
1.9512007680500 × 500IP30560IndoorXR / virtual production, broadcast, live events, theatre
IL-FISS-IRHera2.5
INFiLED · HERA
2.56003840320 × 480IP30440Indoorretail, corporate, commercial, rail transport / stations
CLI1.9
Leyard · CarbonLight CLI Series
1.910003840500 × 500IP401200Indoorindoor rental, staging and flexible-fixed installations; 90-degree corner-beveled walls
NEV019
Leyard · NEV Series
1.95310003840500 × 1000IP30350Indoorindoor fixed installations (ISE 2024 feature product)
Tfree-Pro-S3.9
Leyard · TFree Series
3.9550038401000 × 500IP30720Indoortransparent LED mesh for indoor fixed/creative installations, glass facades, retail
VTII0.7
LianTronics · VT II
0.76003840600 × 337.5IP60470Indoorcontrol center, broadcasting studio, exhibition hall
VTII1.2
LianTronics · VT II
1.26003840600 × 337.5IP60330Indoorcontrol center, broadcasting studio, exhibition hall
EC1.9
LianTronics · E-Corner
1.99007680250 × 500IP30500Indoor90° corner / small-arc creative splicing
Hercules 6.8
LianTronics · Hercules
6.8700038401200 × 1200IP66720Outdooroutdoor DOOH billboard
C-Rock P3.91 Indoor (500x1000)
QSTECH / Chipshow · C-Rock Series (Indoor / Outdoor)
3.918003840500 × 1000Front IP40 / Rear IP40500—rental staging: die-cast aluminum, -10° to 15° curved splicing, magnetic modules with quick front maintenance, fanless ≤40dB
DL0.7
ROE Visual · Denali
0.7810007680600 × 337.5IP40346Indoor—
DL1.2
ROE Visual · Denali
1.210007680600 × 337.5IP40494Indoor—
RB2.3
ROE Visual · Ruby
2.3115003840500 × 500IP40720Indoor—
V4ST
ROE Visual · Vanish ST
4.6500076801000 × 1000IP65700Outdoor—
URMIII 2.6
Unilumin · URMIII
2.645003840500 × 500IP30960Indoorindoor/outdoor rental staging, touring, exhibitions, broadcast
URMIII 3.9 Outdoor
Unilumin · URMIII
3.940003840500 × 500IP651340Outdoorindoor/outdoor rental staging, touring, exhibitions, broadcast
Mslim P1.9 (500x500)
Yes Tech · Mslim Series
1.99003840500 × 500IP50680Indoorindoor commercial fixed: shopping malls, supermarkets, brand stores, lobbies; multi-size cabinets, front installation/maintenance
MG10 P2.6
Yes Tech · MG10 Series
2.610007680500 × 500IP50650Indoorhigh-end indoor rental: conferences, award ceremonies, indoor concerts, TV studio
MAir P5.95 (mesh)
Yes Tech · MAir Series
5.95475076801000 × 1000IP65500Outdoorlarge-scale touring events (concerts, award ceremonies); transparent mesh + solid versions, iF Design Award
AW1.2 Pro
Absen · AW Pro
1.2535007680—IP65—Outdooroutdoor ultra-HD COB fixed install, premium DOOH
X163
Absen · X (Absenicon X)
1.8760038403600 × 2025IP40/21—Indoorall-in-one conference displays 108"/136"/163"; MicroLED/COB, Android 11, optional touch, electric lifting bracket
PL3.9 Pro V3
Absen · PL V3 (AbsenLive)
3.950007680500 × 1000IP65—Outdoorindoor/outdoor rental, touring, broadcast; complete panel depth 88mm, 20m hanging + wind bracing
A99
Absen · A99
6.25700076801600 × 900IP65—Outdoorsports stadiums, perimeter displays, outdoor advertising
MV 10.4
INFiLED · MV
10.450003840—IP65—OutdoorDOOH, city squares, commercial pedestrian zones, transportation hubs, facade
MGP1.2
Leyard · MGP Series
1.256003840600 × 337.5—543Indoorindoor fixed fine-pitch video walls at tiled-LCD-like value; front-access
UslimIII O 1.9 MIP
Unilumin · UslimIII O
1.950007680—IP69K—Indooroutdoor DOOH: CBD, street furniture, transport signage, billboards
UsurfaceX 10
Unilumin · UsurfaceX
101000015360—IP66&IP69K—Outdooroutdoor large screens, digital signage, transportation hubs
Mview P3.3
Yes Tech · Mview Series
3.3100003840960 × 960IP65—Outdooroutdoor fixed DOOH advertising billboards; 90° corner splicing for square/arc columns
TRB1.2
Desay · TRB
1.25700—600 × 337.5IP30/30—Indoorfine pitch rental, TV station, exhibition, conference
G5
Desay · G
5.25000—1000 × 500IP30/30—Indoortransparent window/retail display, architectural installation
G-Poster Std 2 1.86
Gloshine · G-Poster Std 2
1.866003840640 × 1920———LED poster, retail, exhibitions, foldable design
CF Pro 2.6
Gloshine · CF Pro (Curface Pro)
2.6—7680500 × 500IP30—Indoorflexible indoor creative display; ultra HD, flexible cabinets
CB MAX 3.9
Gloshine · CB MAX
3.9—76801000 × 1000IP65/IP54—Outdooroutdoor rental; transparent + solid models, wind-bracing frame support
VII-2.5
Lighthouse · Velocity
2.54000—480 × 540IP65—Outdoorsports stadiums, arenas, universities, airports, transportation hubs, DOOH billboards
Impact 10(系列级)
Lighthouse · Impact
106000——IP65—Outdoorstadiums, outdoor digital signage, advertising billboards, theme parks
DH3112
QSTECH / Chipshow · H31 Series
1.25503840640 × 480——Indoorindoor fine-pitch fixed: full front maintenance
FP-I 1910
QSTECH / Chipshow · H27 Pro Series
1.95503840610 × 343——Indoorindoor fine-pitch fixed: 16:9 energy-saving indoor FPP, full front maintenance
AF-6711
Daktronics · Galaxy Message Displays (AF-6700 transit / GT6x / GS6)
2.5———IP65—Outdoorrail/bus platform displays, commercial message centers, outdoor signage
Vanguard VF-2420-48x320-20-RGB
Daktronics · Vanguard Dynamic Message Signs (DMS)
2012400—————highway dynamic message signs, toll/lane management, variable speed limit
ZS Pro 4.81 (Outdoor)
Gloshine · Zebra Pro & Zebra Mini Pro
4.81——500 × 1000IP65/IP54—Outdooroutdoor rental; easy installation, multiple installation options, curving

Sources: official vendor spec sheets and product pages, verified 2026-09-26. Each model page in our catalog lists its source URL. Figures are per-model as published; series-level pages may group several pitches.

Indoor vs semi-outdoor vs outdoor: what changes

RequirementIndoorSemi-outdoor (covered)Outdoor
Brightness600–1,500 nits2,500–5,000 nits5,000–10,000+ nits
IP ratingIP20–IP40IP43–IP54IP65 or higher
Pixel pitch0.9–2.6 mm typical2.6–3.91 mm3.91–10 mm
Operating temperature0–40 °C−10–50 °C−20–60 °C
Refresh rate (if filmed)≥ 3,840 Hz≥ 3,840 Hz1,920 Hz and up
MaintenanceFront service commonFront or rearRear, weatherproof

Pixel pitch calculator

Enter how close the nearest viewer gets — the rule of thumb returns the coarsest pitch that still looks seamless. For the full calculator with wall size and cabinet counts, see the pixel pitch calculator.

Glossary

Pixel pitch
Center-to-center distance between adjacent LEDs, in millimeters. “P2.6” usually means exactly 2.604 mm. Smaller pitch = higher resolution at the same size. See the pixel pitch guide.
Brightness (nits)
Light output per square meter; 1 nit = 1 cd/m². Indoor walls run 600–1,500 nits, outdoor 5,000–10,000+. Check whether the figure is calibrated brightness or peak.
Contrast ratio
Ratio of the brightest white to the darkest black the panel produces, e.g. 5000:1. High contrast matters most in controlled-light indoor installs.
Refresh rate
How many times per second the image is redrawn, in Hz. 1,920 Hz is standard; 3,840 Hz+ is needed for camera work; 7,680 Hz is the current broadcast bar.
Grayscale
Number of brightness steps per color channel, in bits. 14–16 bit is typical; higher bit depth gives smoother gradients at low brightness.
Viewing angle
The angle at which brightness drops to half, horizontally and vertically — typically 140–160°. Wider is better for audiences spread across a venue.
Color gamut
The range of colors the panel can reproduce, stated as % of NTSC or DCI-P3. Wider gamut = richer color, relevant for broadcast and brand work.
Color temperature
White point of the panel, in Kelvin — commonly 6500K. Must match across all cabinets on one wall or seams become visible.
IP rating
Ingress protection code: first digit = dust, second = water. IP65 = dust-tight + water jets. Often stated as a front/rear pair (e.g. IP65/IP54).
Scan mode
How many LED rows share one driver, e.g. 1/16. Lower scan ratios usually mean higher brightness and better low-grayscale, with more driver ICs.
Power consumption
Stated as max (full-white, for breakers) and average (typical content, for running cost), in W/m². Max can be 2–3× average.
Cabinet
The rigid frame holding the modules — commonly 500×500 mm or 500×1000 mm. Weight (often 7–13 kg) decides rigging and transport.
Module
The smallest replaceable LED unit inside a cabinet, e.g. 250×250 mm. Spare-module percentage belongs on every quote.
Maintenance access
Front service (modules pull from the front — needed when the wall backs onto a wall) vs rear service. Some cabinets do both.
Pixel density
Pixels per square meter = (1000 / pitch)². P2.6 packs ≈148,000 px/m²; P3.91 ≈65,500 px/m². Pure math, not a vendor claim.
Calibration
Factory or on-site adjustment aligning brightness and color across modules and cabinets, so the wall reads as one surface.
Common cathode
A driver architecture that powers red, green and blue LEDs at different voltages, cutting power draw and heat vs common anode.
HDR
High dynamic range support — wider brightness and color range in the signal chain. Needs matching source, processor and panel to matter.
Virtual pixel
A marketing term for resolutions achieved by pixel-sharing rather than physical LEDs. Compare physical pitch, not virtual claims.
Signal / power redundancy
Backup paths: dual signal inputs or dual power supplies so one failure does not black out the wall. Standard on rental and mission-critical installs.

Procurement checklist: 8 items for your quote

Print this and check it against every vendor quote.

  1. Exact pixel pitch — not just “P2.6”. Ask whether it is 2.604, 2.976 or another exact figure.
  2. Brightness in nits — and whether it is calibrated brightness or peak.
  3. Refresh rate — 3,840 Hz minimum if any camera will shoot the wall.
  4. IP rating, front and rear — “IP65” alone usually means the front only.
  5. Power, max and average (W/m²) — max sizes your breakers, average sizes your bill.
  6. Cabinet weight and dimensions — rigging, transport and crew size follow from this.
  7. Scan mode and grayscale — affects image quality at low brightness; often unpublished, so ask.
  8. What the quote omits — spare modules (%), control system, cabling, rigging, software licenses.

This hub and the pixel pitch guide

Two pages, two jobs. This page covers all specification categories and compares models across every parameter. The pixel pitch guide goes deep on pitch alone — the full pitch ladder, viewing-distance math and series counts. Related comparisons: P2.6 vs P3.91, rental pitch guide, panels for broadcast studios, panels for churches.

Frequently asked questions

What are the most important LED display specifications?

Pixel pitch, brightness, refresh rate, IP rating and power consumption decide roughly 90% of whether a panel fits your project. Pitch sets the closest viewing distance, brightness and IP rating decide indoor vs outdoor use, refresh rate matters whenever cameras are involved, and power draw sizes your electrical supply.

How do I read an LED spec sheet?

Start with the exact pixel pitch, not the marketing name: “P2.6” usually means 2.604 mm. Check whether brightness is stated in nits (cd/m²), whether refresh rate is listed per model or per series, and whether the IP rating covers the front, the rear, or both. Blank fields on our pages mean the vendor does not publish that figure — we leave them blank rather than estimate.

What brightness (nits) do I need?

Indoor walls typically run 600–1,500 nits; semi-outdoor covered installs need 2,500–5,000 nits; direct-sun outdoor needs 5,000–10,000+ nits. More is not always better indoors — excessive brightness causes eye fatigue and washes out contrast in dark rooms.

What does IP65 mean on an LED cabinet?

IP65 means dust-tight (6) and protected against water jets (5). Outdoor cabinets are usually IP65 on the front; the rear is often IP54 or lower, which is why the rating is sometimes written as a pair like IP65/IP54. Indoor cabinets are typically IP30–IP40.

Is a higher refresh rate always better?

Above 3,840 Hz the difference is invisible to the naked eye; the payoff is on camera, where low refresh rates cause banding and flicker in footage. For broadcast and virtual production, 7,680 Hz is the current bar. For a lobby wall nobody films, 1,920 Hz is fine.

Should I choose P2.6 or P3.91?

P2.6 suits viewers from about 2.6 m — stage, broadcast, corporate. P3.91 suits 4 m and beyond — touring, concerts, large venues — at a lower cost per square meter. See our head-to-head: P2.6 vs P3.91.

Can I use an indoor LED panel outdoors?

No. Outdoor duty needs high brightness (5,000+ nits), weatherproofing (IP65), a wider operating temperature range, and UV-resistant materials. An indoor panel will be unreadable in daylight and will fail in rain. Compare the requirements in the scenario table.

What is scan mode (1/16, 1/8…)?

Scan mode describes how many LED rows share one driver circuit. A lower scan ratio (1/8 vs 1/16) generally means higher brightness and better low-grayscale performance, at the cost of more driver ICs. It is one of the figures vendors most often leave unpublished.

How much power does an LED wall use?

Multiply the panel’s max power (W/m²) by your wall area for the worst case, and the average power for typical running cost. A 20 m² wall at 800 W/m² max draws up to 16 kW at full-white — that sizes your breakers. Real content averages far below max.

Why do some specification fields say “—” on this site?

Because the vendor does not publish that figure. Every value in our tables comes from an official spec sheet or product page with a recorded source URL and verification date. Where the source is silent, we show a blank instead of guessing — ask the vendor directly for those numbers before you buy.

Last updated: 2026-10-12. Specification values verified 2026-09-26 against official vendor sources; see methodology.