Interactive tool

Pixel pitch calculator

Tell it the wall size and how close the nearest viewer gets. It recommends a pitch class, works out the wall resolution and cabinet count, and shortlists real series from our catalog that cover that pitch.

Last verified: 2026-09-26 · Specs transcribed from official vendor pages and spec sheets.

Content type

How the math works

  • Pitch pick: minimum seamless viewing distance in meters ≈ pitch in millimeters. The calculator takes the coarsest catalog pitch class at or below your viewing distance.
  • Resolution: wall width in mm ÷ pitch in mm, rounded to whole pixels — pure geometry, no vendor claims.
  • Cabinet count: assumes the 500 × 500 mm rental standard. Fixed-install walls use different sizes; confirm against the spec sheet.
  • Matching series: active series in our catalog whose published pitch range covers the recommended pitch. Coverage is computed from real model data, never estimated.

Frequently asked questions

How accurate is the viewing-distance rule this calculator uses?

It is the industry rule of thumb: minimum seamless viewing distance in meters is roughly the pixel pitch in millimeters. It is accurate enough for budgeting and shortlisting, but it is not a lab measurement — perceived sharpness also depends on content, ambient light, and the viewer’s eyesight. For camera-facing walls, refresh rate and grayscale matter more than pitch alone.

What cabinet size does the cabinet count assume?

Standard 500 × 500 mm rental cabinets, the de-facto size for touring and events. Fixed-install and outdoor walls often use different cabinet sizes (for example 960 × 960 mm or 1000 × 500 mm), so treat the count as a planning estimate and confirm against the exact cabinet in the spec sheet.

Why does the calculator recommend two pitches?

The standard pick is the coarsest pitch that still looks seamless at your viewing distance — the economical choice. The premium pick goes one to two classes finer and is meant for text-heavy content, control rooms, or walls that will be filmed, where extra resolution is actually visible.

Are the matched series the only cabinets I can use?

No. They are the active series in our catalog whose published pitch range covers the recommended pitch — a shortlist, not an exhaustive list. Always verify the exact pitch, brightness, and refresh rate in the vendor’s spec sheet before specifying a wall.

Can I use this calculator for an outdoor wall?

For the pitch recommendation, yes — viewing distance physics works the same outdoors. But pitch is rarely the binding constraint outside: brightness (nits), IP65 weatherproofing, and power draw decide outdoor duty far more than going finer than P4.81.

Keep exploring