
The short answer
Match the pitch to the closest viewer. P2.6 for cameras and front rows under 3 meters; P2.9 as the balanced middle; P3.91 as the touring workhorse from 4 meters out; P4.81 for big outdoor surfaces viewed from far away. Finer pitch costs more per square meter, draws more power, and buys nothing your audience cannot see. Figures below come from our catalog of 240 series across these four pitch classes, last verified 2026-09-26.
Head to head
| P2.6 | P2.9 class | P3.91 class | P4.81 class | |
|---|---|---|---|---|
| True pitch | 2.6 mm | 2.9 / 2.97 / 2.98 mm | 3.9 / 3.91 mm | 4.8 / 4.81 mm |
| Minimum viewing distance | ~2.6 m | ~2.9 m | ~3.9 m | ~4.8 m |
| Resolution per 500 × 500 cabinet | 192 × 192 px | ~172 × 172 px | 128 × 128 px | ~104 × 104 px |
| Series in our catalog | 65 | 44 | 101 | 30 |
| Relative cost per ㎡ | Highest | High | Medium | Lowest |
| Best for | Broadcast, xR, front-row corporate | Conferences, exhibitions | Concert touring, festivals | Outdoor stages, billboards |
Series counts are from the LEDPanelDB catalog (14 manufacturers, verified 2026-09-26). Cost ordering is relative, not a price quote: we list no prices. How we verify specs
Pixel pitch and density
Pixel pitch is the center-to-center distance between LEDs, in millimeters. Density follows the inverse square: a P2.6 wall packs about 3.4× the LEDs per square meter of a P4.81 wall ((4.81 / 2.6)² ≈ 3.4). That multiplier is the root cause of almost every difference below: resolution, cost, power and heat all scale with LED count.
Naming is messier than physics. Vendors round true pitches differently on datasheets, which is why you see P2.9, P2.97 and P2.98 (or P3.9 vs P3.91, P4.8 vs P4.81) for what is effectively one pitch class. We group them; see the pixel pitch naming guide.
Sharpness and viewing distance
The rule of thumb the whole industry uses: minimum viewing distance in meters ≈ pitch in millimeters. Closer than that, individual pixels resolve and the image breaks up; much farther, and you paid for resolution nobody can see.
- P2.6 stays clean from ~2.6 m: the choice when cameras or front rows get close.
- P2.9 class from ~2.9 m: the balanced middle for conferences and exhibitions.
- P3.91 class from ~3.9 m: the volume pitch for concerts and festivals.
- P4.81 class from ~4.8 m: big surfaces, long sightlines, outdoor duty.
Cameras are stricter than eyes. Broadcast and virtual production punish coarse pitch and low refresh rates, which is why studios cluster on P2.6 even at distances where P2.9 would satisfy a live audience.
Cost logic: why finer pitch costs more
We publish no prices, but the cost ordering is structural and worth understanding before you request quotes:
- LED count. That 3.4× density multiplier between P2.6 and P4.81 is 3.4× the LEDs, driver ICs and solder joints per square meter.
- Tolerances. Placing LEDs 2.6 mm apart with uniform brightness demands tighter manufacturing than 4.81 mm, which means lower yields and higher prices.
- Everything downstream. More pixels need more processing power, more power supply and more cooling per square meter of wall.
Net effect on cost per square meter: P2.6 > P2.9 > P3.91 > P4.81, for comparable quality tiers. Treat any per-square-meter price you are quoted as a starting point: brand, brightness bin, refresh rate and cabinet construction move it substantially.
Power and heat
More LEDs per square meter means more watts per square meter. In our comparison tables, vendor-quoted maximum power draw runs 450–640 W/㎡ for P2.6 cabinets and 420–680 W/㎡ for P3.91 cabinets (figures normalized to W/㎡; originals kept on each product page).
For venue planning, size the power distribution and cooling for the wall's maximum draw, not its average. Outdoor P4.81 walls add another wrinkle: high-brightness outdoor duty plus summer heat is the harshest thermal case in rental.
Application to pitch
| Application | Recommended pitch | Why |
|---|---|---|
| Broadcast studio, xR / virtual production | P2.6 | Cameras punish coarse pitch; 7,680 Hz options available (Absen Saturn, ROE Topaz, AOTO DL) |
| Corporate events, exhibitions | P2.6 – P2.9 | Front rows inside 3–4 m; detail matters at close range |
| Concert touring, festivals | P3.91 | The volume pitch: clean from 4 m, best cost per square meter of show |
| Outdoor stages, billboards | P3.91 – P4.81 | Long sightlines; prioritize brightness and IP65 weatherproofing over pitch |
How to choose
- Measure the closest viewer. Apply the meters ≈ millimeters rule. That single number eliminates at least two pitches immediately.
- Ask about cameras. If the show is broadcast or recorded for LED-wall virtual production, bias one pitch finer and demand high refresh (≥3,840 Hz, ideally 7,680 Hz).
- Check the venue power. Fine-pitch walls draw more per square meter; confirm supply before falling in love with P2.6.
- Think in inventory, not in walls. Rental houses that stock one platform across pitches (same rigging, spares and processing) run cheaper than mixed fleets.
- Compare real cabinets, not datasheet maxima. Open the P2.6 comparison and P3.91 comparison: every figure links to its official source.
Frequently asked questions
What is the difference between P2.9, P2.97 and P2.98?
Almost nothing. They are naming variants for the same ~2.9 mm pitch class: vendors round the true pitch (2.90, 2.97, 2.98 mm) differently on the datasheet. Our catalog groups them as one P2.9 class (44 series). The same applies to P3.9 / P3.91 and P4.8 / P4.81.
Can I mix different pixel pitches in one video wall?
No. Cabinets of different pitches have different pixel densities, so their images cannot tile seamlessly, and brightness/color calibration will not match across the seam. If you need two pitches, build two separate walls.
Is a smaller pixel pitch always better?
No. Beyond the viewing distance, extra resolution is invisible and you pay for it three times: higher cost per square meter, more power and heat, and heavier processing. Match the pitch to the closest viewer, not to the spec sheet maximum.
Which pitch should I choose for an outdoor concert stage?
P3.91 or P4.81 in most cases. Viewing distances are long, so fine pitch buys nothing, and outdoor duty demands high brightness and weatherproofing (typically IP65), which the coarser rental pitches are built for.
How many series of each pitch does LEDPanelDB catalog?
As of our last verification (2026-09-26): 65 series at P2.6, 44 in the P2.9 class (2.9 / 2.97 / 2.98 mm), 101 in the P3.91 class (3.9 / 3.91 mm), and 30 in the P4.81 class (4.8 / 4.81 mm), across 14 manufacturers.
Do finer pitches use more power?
Per square meter, yes, in tendency: finer pitch packs more LEDs and driver ICs. In our comparison tables, vendor-quoted maximum power runs 450–640 W/㎡ for P2.6 cabinets and 420–680 W/㎡ for P3.91 cabinets. Always check the power figures against your venue supply, not just the pitch.