
The short answer
Ten P2.6 indoor rental cabinets from ten manufacturers. Vendor-quoted brightness runs 600 to 1,500 nits; refresh rates run 3,840 to 7,680 Hz, with 7,680 Hz options from Absen, ROE, AOTO and QSTECH; 500 × 500 mm cabinets mostly weigh 5.5 to 9.5 kg. Every figure below is transcribed from official vendor documents, last verified 2026-09-26.
| Product | Pixel pitch (exact) | Brightness | Refresh rate | Grayscale | Cabinet size / weight | Power (max) | Maintenance | IP rating |
|---|---|---|---|---|---|---|---|---|
| Absen SA2.6 | P2.6 * | 1,500 nits | 7,680 Hz | 16-bit | 1,000 × 500 × 70 mm / 500 × 500 × 70 mm · 9.5 kg / 5.5 kg | 540 W/㎡ | Front / rear | IP40 / IP21 |
| Unilumin URMIII 2.6 | P2.6 * | 1,000 cd/㎡ | 3,840 Hz @60 | 14-bit | 500 × 500 × 83 mm · 8 kg | 560 W/㎡ | Rear | IP30 |
| Leyard LN2.6 | 2.604 mm | 1,000 nits | 3,840 Hz (7,680 Hz noted) | 16-bit | 500 × 500 × 79 mm / 500 × 1,000 × 79 mm · 7.5 kg / 13.5 kg | 600 W/㎡ | Rear (cabinet); modules front-serviceable (indoor version) | IP50 |
| ROE Visual Topaz TP2.6 | 2.604 mm | 1,500 nits (calibrated) | 7,680 Hz | 16-bit | 500 × 500 × 73 mm · 8.0 kg | 560 W/㎡ | Front / rear | Indoor IP (per brochure) |
| INFiLED IRDB2.6-VSS | P2.6 * | 1,000 to 1,500 nits | 3,840 Hz | 18-bit+ (HDR10) | 500 × 500 × 75.5 mm · 8.8 kg | n/a | Front / rear (magnetic modules) | IP30 |
| AOTO DL2.6 | 2.604 mm | n/a | 7,680 Hz | n/a | 500 × 500 mm (depth not stated) · 7.2 kg | 640 W/㎡ | n/a | n/a |
| QSTECH (Chipshow) C-Shine Plus 2.6 | 2.604 mm | 600 to 800 nits (indoor) | 7,680 Hz (indoor; ≥3,840 Hz across the line) | ≥14-bit | 500 × 500 mm (also 500 × 1,000 mm), 81 mm deep · ≤7 kg (500 × 500) / ≤14 kg (500 × 1,000) | 500 W/㎡ | Front / rear (5-second quick-release module) | IP40 (indoor) / IP54 (outdoor) |
| LianTronics Pilot Plus 2.6 | P2.6 * | 800 nits | n/a | n/a | 500 × 500 × 80 mm · 8.5 kg/㎡ (as stated on official page) | n/a | Rear (modules front/rear serviceable) | n/a |
| Gloshine MV Ultra 2.6 | P2.6 * | n/a | 3,840 Hz / 7,680 Hz | 14 to 16 bit | 500 × 500 × 76 mm · 8.5 kg (±10%) | n/a | Front / rear | IP30 |
| Yes Tech MU 2.6 | P2.6 * | 800 to 1,000 nits | ≥3,840 Hz | n/a | 500 × 500 × 73 mm / 500 × 1,000 × 73 mm · 7.6 kg / 12.6 kg | 450 W/㎡ (±15%) | Front / rear | IP50 |
“n/a” means the figure was not found in the vendor’s public documents. * Pitch shown as the vendor’s nominal label; the exact mm value was not published. Why “P3.9” usually means 3.906 mm
Reading this table
- Brightness: nits = cd/㎡. Note that ROE’s 1,500 nits is a post-calibration figure, while most vendors quote typical values, so they aren’t strictly comparable (see methodology).
- Power: normalized to W/㎡. Vendors that quote per-cabinet watts (Unilumin, ROE, AOTO) were converted using the cabinet’s footprint; the original figure is kept on each product page.
- Weight: listed as stated by the vendor; some include PSU/receiving card, some don’t. We don’t force them into one number.
Coverage gaps
These manufacturers have no P2.6 indoor rental cabinet line in public channels. That’s information, not an omission:
- Daktronics: No P2.6 or P3.91 indoor rental cabinet line found in public channels. The current indoor line is fixed-install oriented (NPN/DVN/LVN series); the rental PST series is legacy (2009 to 2011). Closest 3.9 mm indoor product is the LVN-2010 fixed-install module (3.9 mm pitch, 1,500 nits, front maintenance), which is not a rental cabinet. Source
- Desay: No P2.6 / P3.91 indoor rental product found. The closest rental line is the ultra-slim TR series in non-standard pitches: TR1.9 (1.968 mm), TR2.5 (2.583 mm), TR2.9 (2.952 mm). Source
Individual product pages
Frequently asked questions
Which P2.6 cabinets in this table have the highest refresh rate?
Four reach 7,680 Hz: Absen Saturn SA2.6, ROE Topaz TP2.6, AOTO DL2.6 and QSTECH C-Shine Plus (indoor). The rest of the table sits at 3,840 Hz. High refresh matters for broadcast and virtual production work.
What brightness do P2.6 rental cabinets typically quote?
Vendor-quoted figures in this table run from 600 nits (QSTECH C-Shine Plus, indoor) to 1,500 nits (Absen Saturn SA2.6, ROE Topaz TP2.6). Note that ROE’s 1,500 nits is a post-calibration figure while most vendors quote typical values, so the numbers aren’t strictly comparable across vendors.
How much does a P2.6 rental cabinet weigh?
At the standard 500 × 500 mm footprint, cabinets in this table weigh 5.5 to 9.5 kg: Absen Saturn’s 500 × 500 cabinet is lightest at 5.5 kg, AOTO DL2.6 is 7.2 kg, and most others land between 7.5 and 9.5 kg.
What is the minimum viewing distance for P2.6?
Use the rule of thumb: minimum viewing distance in meters is roughly the pitch in millimeters, so about 2.6 meters for P2.6. Closer than that and individual pixels become visible.
Where do these P2.6 specs come from?
Every figure is transcribed from the manufacturer’s official product page or spec sheet, linked in the Source column of each row, and was last verified 2026-09-26. Values not published by the vendor show as n/a; nothing is estimated.
Choosing between pitches? P2.6 vs P3.91 for rental & staging